View Mobile No.

Send Email

Pneumatics

Our product range includes a wide range of basic pneumatic training kit and advance pneumatic training kit.
Basic Pneumatic Training Kit

Basic Pneumatic Training Kit

Price on Request

Product Brochure

Product Details:
Country of OriginMade in India
UsageEducational
Automatic GradeSemi-Automatic
BrandHytech Automation
MaterialAluminium alloy
ConditionNew
ColorWhite

Basic Pneumatic Training Kit is designed to provide hands on experience on conventional pneumatic valves. Most of the commonly used pneumatic valves are provided along with Basic Pneumatic Training Kit. Each vale is mounted on a plate which is engraved with its name as well as symbol. This way, participants can understand as well as design pneumatic circuits with pneumatic symbols.

Pneumatic circuit design as well as simulation software is also provided with basic pneumatic training kit.

Following accessories are provided with Basic Pneumatic Training Kit for ease of operation:

  1. Three way Two position Hand slide valve
  2. Five way manifold
  3. Four way manifold
  4. Blocking (Isolation) sticks

Basic Pneumatic Training Kit:

  1. Horizontal flat face (front) : 950mm x 400mm
  2. Horizontal flat face (back) : 950mm x 400mm
  3. Vertical work area on front face : 950mm x 720mm
  4. Vertical work area on back face : 950mm x 720mm

Following types of valves are provided with Basic Pneumatic Training Kit:

  1. Hand Operated / Lever Operated Direction Control Valves
  2. Hand Operated / Push Button Operated Direction Control Valves
  3. Pilot Operated Direction Control Valves
  4. Logic Valves (AND / OR)
  5. Actuators (Cylinders)
  6. Flow Control Valves
  7. Air Treatment Units (FRL, Manifolds, etc)
  8. Hand Slide Valve
Get Best QuoteRequest Callback
Advance Pneumatic Training Kit
  • Advance Pneumatic Training Kit
  • Advance Pneumatic Training Kit

Advance Pneumatic Training Kit

Price on Request

Product Brochure

Product Details:
ColorWhite

Advance electropneumatic training kit is controlled through PLC. It gives hands on experience on pneumatic valve operation through PLC. Participants can design a ladder diagram and execute the experiments directly on the hardware kit.

Advance model of pneumatic kit comes with a double sided work bench. Front portion is mounted with all electrical / PLC operated valves as well as actuators. Back portion is mounted with conventional valves and actuators.

 

 

Control module of Electropneumatic Training Kit (Model: Advance) comes with following control equipment:

  1. PLC input module:

PLC input module is hard wired to PLC inputs. Each input is connected with a three pin connector to make the assembly modular. PLC input module is equipped with a push button for each input which functions as an input override. Necessary precautions are taken to provide short circuit protection. Corresponding input bits are printed on the PLC input module.

  1. PLC output module:

PLC output module is hard wired to PLC outputs. Each output is connected with a three pin connector to make the assembly modular. Necessary precautions are taken to provide short circuit protection. Corresponding output bits are printed on the PLC input module.

  1. Field input module:

Field input module is hard wired to field inputs. Each field input is connected with a three pin connector to make the assembly modular. Name of a corresponding field input device is printed on Field input module.

  1. Field output module:

Field output module is hard wired to field outputs. Each field output is connected with a three pin connector to make the assembly modular. Name of a corresponding field output device is printed on Field input module.

With these input and output modules, participants can easily connect any desired input / output to any desired PLC input / output. This enables participants to carry out different PLC programs with ease as well as efficiency.

Electropneumatic training kit (Model: Advance) can also be used for basic pneumatic training kit. At a time, 4 students (2 on each side) can work on an Electropneumatic training kit (Model: Advance).

Following accessories are provided with Electropneumatic Training Kit for ease of operation:

  1. Three way Two position Hand slide valve
  2. Five way manifold
  3. Four way manifold
  4. Blocking (Isolation) sticks
  5. Patch cord holder

Electropneumatic Training Kit (Computer Controlled) with PLC:

Horizontal flat face (front)                  : 1200mm x 400mm

Horizontal flat face (back)                   : 1200mm x 400mm

Vertical work area on front face          : 1200mm x 720mm

Vertical work area on back face          : 1200mm x 720mm

 

Following types of valves are provided along with electropneumatic training kits:

Basic (Conventional) Valves:

  1. Hand Operated / Lever Operated Direction Control Valves
  2. Hand Operated / Push Button Operated Direction Control Valves
  3. Pilot Operated Direction Control Valves
  4. Logic Valves (AND / OR)
  5. Actuators (Cylinders)
  6. Flow Control Valves
  7. Air Treatment Units (FRL, Manifolds, etc)
  8. Hand Slide Valve

Advance Valves:

  1. Solenoid Operated Direction Control Valves
  2. Pressure Switch
  3. Air Regulators
  4. Time Delay Valves
  5. Vacuum Generator
  6. Pneumatic Motor

 

Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Pneumatics"?
Thank you Your Enquiry has been sent successfully.
© Hytech Automation. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.